RSS Feed

Category Archives: Soaps

Cookie Sandwich Soaps P2

I totally love how the cookie soaps came out. *grin* It took a little longer to get the bath frosting to the right consistency than I expected and took my handheld mixer nearly half an hour to cool down. Lol. I had bought a cookie press/cake decorator years back and never got around to actually using it, so I thought I’d try it for these. It worked perfectly! I used a star tip straight down and was able to do it while the bottom wafer sat on a strip of wax paper on the scale. I applied a quarter ounce of frosting to each wafer and immediately pressed the second wafer on top, but learned after the first to not use too much pressure. Lol. That glove had to go in the trash because I had soap frosting all over. *grin*

They harden up pretty nicely. I put them in a ziploc bag to sit overnight and will check them tomorrow. I’m hoping they harden up a bit more so that they’re not too delicate to package. I had pictured packaging them in cute cello bags and tying them off, but there’s no way that I’m getting a delicate little puff in a bag without messing it up or getting frosting all over. We’ll wait and see if it looks easier then. So far they look pretty cheap too, depending on how they get packaged. *happy dance* Hopefully they sell out at the craft fair like last year’s dessert cake soaps did. *crossing fingers*

20121016-155127.jpg

20121016-155309.jpg

Cookie Sandwich Soaps P1

I am beyond excited at how the cookie sandwich soaps have turned out so far. I was shooting for a chocolate brown color, but the brown pigment I have wasn’t looking overly chocolatey, so I added the tiniest dash of black matte powder. I had never used powder coloring before, but of course I had researched and knew that a tiny bit goes a long way. I didn’t realize that a sixteenth of a teaspoon was a lot in this situation. Lol. I was kind of upset when I was whisking the batch and saw how dark the soap was turning, but you know me and waste…I decided to pour them and I could remelt for something else later, but they’d be in handy wafers instead of a massive clump. As they began to set I noticed that they continued to darken (I think it was actually the settling of everything from all of that whisking since it took awhile to incorporate the powder). I’m so happy with them now though! They look like chocolate grasshopper cookies or York miniatures. I can’t believe it. I still need to make the frosting to sandwich and I’m going to let that look rather whimsical so that these don’t look too realistic. In the picture they’re a little glossy, but that will dull in a bit. I had a lot of trouble getting them to release from the molds and popped them in the freezer to contract, to unmold. Yeah, um…*blush and suddenly looking all around* I popped them in as I prepared the supplies to paint the trees and I lost all track of the entire world once I started painting. After I was down I was on cloud 9 and got on SL for a couple of hours. I came out to make my tea and was tidying up when I saw an empty mold sitting on the counter. *facepalm* I ran over and yanked the wafer molds out of the freezer. I had left the tree mold on the counter since I was going to add the wafer ones after the ten minute cool down, so I’d only do one round of equipment washing (I take extra measures for that, so it’s a real pain to do it in multiple rounds). Thankfully these soaps won’t be ruined, but I need to let them slowly return to room temperature. If the condensation stays on them I run the risk of the fuzz popping up on them. It’s a common issue that occurs because glycerin is a humectant, so it draws water from the air, and then whatever itty bitty particles are in the air stick to the moisture, making the soaps look fuzzy. The fuzz can sometimes be wiped off carefully with a damp towel, but that can leave a mess too, and I’d rather write off a soap’s cost than sell something that I’m not proud to have my name attached to. So, I’m going to set an alarm next time I have to use the last resort of freezing a mold. Lol. Anyway, I think they’re adorable and can’t wait to make (and post) Part 2. *grin* Let’s hope that part turns out well too!

20121015-022411.jpg

Christmas Tree Soaps

I have to admit that I’m really happy with these soaps. It took awhile to get the hand painting down, but I loved every moment of it. *cheesy smile* For once I even like that they’re not perfect – it adds to that happy, homemade vibe I think. I will try to darken the tree color in the next batch though. When I started the pour I noticed that because the molds are so shallow the soaps are lighter than it looked when it was in the measuring cup. Some days I have big brain farts. Lol. I also think that I’ll trim off the tree stumps. They’re actually where lollipop sticks should be placed for making lollipops (it’s really a candy mold) and since it’s so shallow I’m having a problem with them breaking off. I think that it might work out better if I just take them off and not worry about it. They’d be a LOT easier to package too! Lol. I’m still stumped over that part. They’re really big, so they don’t fit in any crafter bags and I really don’t think a gallon size ziploc would look overly professional. *grin* I may end up with that holiday colored Saran Wrap I guess. I’m always up to hearing ideas if you want to share. *smile* Anyway, I hope you like these too.

20121015-020617.jpg

Glitter Me Happy

Cheesy, I know, but I couldn’t resist. *grin* I embedded those small glitter flowers in pairs in cute bars with even more glitter. I’m not much of a glitter kind of girl, but I’m loving these glitter soaps. I had some over pour and used that for some more flowers to embed.

20121015-014643.jpg

Cookie Sandwich Soaps

I’ve been playing with the idea of experimenting at cookie sandwich soaps. I’d make two guest rounds as cookies (flat shape like an Oreo instead of regular chocolate chip) and adding a bath whip as the filling. I would probably then package in little gift bags. I thought of making different cream colors and even doing a few macaroon-like coloring, so a few pink, etc. I have a Ho Ho FO which I thought might be good for this, tying in the cookie and cream concept.

I also have been debating on snowmen being my key promotion at the craft event. I thought of doing red and white peppermint swirl snowmen and other wild little combos like that.

Sorry, here’s a better picture

I grabbed the wrong picture for the previous post. Sorry! Ready for my close up this time. 😉

20121009-020454.jpg

A Little Sparkle

Sadly my glitter soaps aren’t as sparkly as I hoped. There is a hint of shimmer as I move them under the light. It was definitely a worthwhile experiment and I realize that part of it is because it was a solid soap base instead of clear. For the outer layer I planned on a clear pour, so I’ll just add some of the iridescent glitter to those too. It was the first time using this flower mold and I was impressed. They have a little detail and are much better than the candy molds I used to use – thicker and massively easier to un-mold. The *cough* lavender of the glitter embeds lightened even more as they set it seems.

20121009-020239.jpg

The fruit of my insomnia

The living room is a tad warm from an overly efficient woodstove, so it was a perfect time to get some work done while avoiding that room. Lol. I am slowly getting stuff ready for next month’s craft fair and although I really should make some more lotions I decided to focus solely on soaps tonight. I tend to get restless and lose interest when I’m not creating new things, so soaps work perfectly since it isn’t unusual for each soap to be a bit different. The obsessive part of my personality freaks over that, but I’ve finally realized how much the restless part of me loves working at fixing that, and knowing it’ll never fully work. Lol.

I worked on the ice cream cone soap for awhile, but then got the urge to make some embeds while it cooled. I got a small flower silicone mold over the summer and decided that would be really cute embedded in a clear bar or round. The first batch I made another pour of the strawberry used in the cone, but then I decided to totally explore one of my untested ingredients. *struggling to control the excited squirming* I went unscented and will scent the outer soap, instead of a two scent layer soap like the first batch, and made them a super soft lavender. Okay, okay, I’ll be honest. I was shooting for a darker shade, near violet, but after 5 drops I decided a lavender was a better option than running the risk of turning someone’s skin purple. Lol. Anyway, I pulled out the untested iridescent soap safe sparkles and mixed it into the soap. I saw the fantastic shimmer when the soap caught the light as I poured into the flower mold. I really hope that the sparkles stay suspended in the soap instead of sinking, but it might be really cool if they do sink to the front. My biggest hope is that the soap sparkles catch the light as well when set as while they were being poured. I can just see a little girl in my mind’s eye lifting her two-toned soap up to the light and smiling as it shimmers. I had to fight the urge to pop the mold into the freezer for a quick set, but I did the right thing and will let them set properly. It’s still a bit like being five and waiting for Eve to finally become Christmas morning though. *grin*

Lastly I decided to make a big batch of the improved mechanic soaps. Larry tested the experimental batches awhile back and said that the guest rounds actually worked better, so I stuck with those molds this time. He said at the time that guys would probably like a pine scent to them better than Pop a Wheelie, although that isn’t bad. I truly tried to make a woodsy scent, but I’m not too sure what this will smell like once the set. Lol. I had added a tiny percentage of Musk FO and then a ml of Christmas Wreath FO, since it has an awesome mixture of balsam and other notes, and then whisked in my additives. I noticed that the scent was a little odd at that point and figured that it was just too soft, so after I reheated the mixture (it drops temp quickly when lots of additives are added, especially when whisking) I added another ml of Wreath. I still didn’t think it was overly impressive and added a tad more musk. That helped, but I tell you it was still a really odd smell. I’m not sure if it’s the oatmeal, pumice, ground flax, or ground apricot seeds, but one of those is really altering the FOs. I reheated the mixture again and knew I needed to try to save the batch since it isn’t the best idea to reheat yet again. I reached into my flat and grabbed for Sand Dunes, which is part of what I use for Pop a Wheelie, but it turns out that I grabbed Sands of Morocco. I added a ml of that and it gave a nice, spicy twist to the mixture. It’ll be interesting to see what it smells like after it sets, since I’m not sure if the culprit will continue to change things while the soaps cool. After thinking over comments Larry has made in the past about the soaps I decided to not worry unless they smell horrible, since he said most guys don’t care what stuff smells like – just that it works as advertised. Lol. I need to make them smell masculine enough for women to think it’d be a good scent for their guy apparently. *grin* I’m crossing my fingers!

My soaps are covered and cooling in the few higher spots that I can reach that my kitten can’t, and my cone soap is all wrapped up to finish setting, so I think it’s time to settle in with an episode of Once Upon a Time and hopefully fall asleep. I just need to keep my mind off of wanting to un-mold the flowers and embed them. *grin* I hope you are slumbering peacefully while I write this and that I am when you’re reading this. 😉

I couldn’t resist including a picture of the sliced soap. I couldn’t believe how perfect the cone looked, so I got all nerdy and photographed it. Lol.

20121008-045750.jpg

Ice Cream Cone Soap Step 1

20121001-025654.jpg